近五年论文情况汇总 |
|||||||
序号 |
年度 |
论文类型 |
第一作者 |
通讯作者 |
论文名称 |
期刊名称 |
影响因子 |
1 |
2014 |
SCI |
高道祥 |
高道祥 |
A Singularly Perturbed System Approach to Adaptive Neural Back-stepping Control Design of Hypersonic Vehicles |
JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS |
0.81 |
2 |
2014 |
SCI |
许云杰 |
李文彬 |
Algorithm of Shadow for Diffraction in Forests based on a Wireless Sensor Network |
APPLIED MATHEMATICS & INFORMATION SCIENCES |
1.232 |
3 |
2014 |
SCI |
李娜 |
钱桦 |
Design and simulation analysis of an improved lower limb exoskeleton |
JOURNAL OF VIBROENGINEERING |
0.66 |
4 |
2014 |
SCI |
李雁北 |
闫磊 |
Dynamics and kinematics analysis and simulation of lower extremity power-assisted exoskeleton |
JOURNAL OF VIBROENGINEERING |
0.66 |
5 |
2014 |
SCI |
康峰 |
李文彬 |
INVESTIGATION AND IMPROVEMENT OF TARGETED BARRIER APPLICATION FOR CUTWORM CONTROL IN VINEYARDS |
TRANSACTIONS OF THE ASABE |
0.843 |
6 |
2014 |
SCI |
徐学锋 |
徐学锋 |
Linear growth of colloidal rings at the edge of drying droplets |
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS |
2.354 |
7 |
2014 |
SCI |
徐道春 |
李文彬 |
Research on chip formation parameters of aluminum alloy 6061-T6 based on high-speed orthogonal cutting model |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
1.779 |
8 |
2014 |
SCI |
张凯 |
徐学锋 |
Temperature distribution along the surface of evaporating droplets |
PHYSICAL REVIEW E |
2.326 |
9 |
2014 |
SCI |
唐亮 |
刘晋浩 |
Topology Optimization and Performance Calculation for Control Arms of a Suspension |
ADVANCES IN MECHANICAL ENGINEERING |
0.5 |
10 |
2015 |
SCI |
丁小康 |
闫磊 |
A novel stumpage detection method for forest harvesting based on multi-sensor fusion |
SIGNAL IMAGE AND VIDEO PROCESSING |
1.43 |
11 |
2015 |
SCI |
徐道春 |
李文彬 |
An improved material constitutive model for simulation of high-speed cutting of 6061-T6 aluminum alloy with high accuracy |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
1.458 |
12 |
2015 |
SCI |
徐学峰 |
徐学峰 |
Analysis of the effects of evaporative cooling on the evaporation of liquid droplets using a combined field approach |
SCIENTIFIC REPORTS |
5.578 |
13 |
2015 |
SCI |
张哲 |
李文彬 |
Behavior of a thermoelectric power generation device based on solar irradiation and the earth's surface-air temperature difference |
ENERGY CONVERSION AND MANAGEMENT |
4.38 |
14 |
2015 |
SCI |
王艺霖 |
徐学峰 |
Combined effects of underlying substrate and evaporative cooling on the evaporation |
SOFT MATTER |
4.029 |
15 |
2015 |
SCI |
张厚江 |
张厚江 |
Comparison of Wood Composite Properties Using CantileverBeam Bending |
BIORESOURCES |
1.425 |
16 |
2015 |
SCI |
廖春辉 |
张厚江 |
Condition assessment of wood structural members at Yu Tomb of the Ming Dynasty |
MATERIALS AND STRUCTURES |
1.714 |
17 |
2015 |
SCI |
郑嫦娥 |
刘晋浩 |
Design and analysis of a wheel-legged hybrid locomotion mechanism |
ADVANCES IN MECHANICAL ENGINEERING |
0.575 |
18 |
2015 |
SCI |
管成 |
张厚江 |
Dynamic determination of modulus of elasticity of full-size wood composite panels using a vibration method |
CONSTRUCTION AND BUILDING MATERIALS |
2.296 |
19 |
2015 |
SCI |
郝志斌 |
李文彬 |
Effects of Electrode Material on the Voltage of a Tree-Based Energy Generator |
PLOS ONE |
3.234 |
20 |
2015 |
SCI |
王林杰 |
李文彬 |
Ergonomic evaluation of the operating characteristics of the 6MF-30 portable pneumatic extinguisher |
APPLIED ERGONOMICS |
2.023 |
21 |
2015 |
SCI |
徐向波 |
徐向波 |
Field Balancing and Harmonic Vibration Suppression in Rigid AMB-Rotor Systems with Rotor Imbalances and Sensor Runout |
SENSORS |
2.245 |
22 |
2015 |
SCI |
郑一力 |
刘晋浩 |
Kinematics modeling and control simulation for a logging harvester in virtual environments |
Advances in Mechanical Engineering |
0.575 |
23 |
2015 |
SCI |
孔建磊 |
刘晋浩 |
New Hybrid Algorithms for Estimating Tree Stem Diameters at Breast Height Using a Two Dimensional Terrestrial Laser Scanner |
SENSORS |
2.245 |
24 |
2015 |
SCI |
张超一 |
张超一 |
Spatial Channel Mapping Matrix Design in Single-Relay System |
IEICE TRANSACTIONS ON COMMUNICATIONS |
0.227 |
25 |
2015 |
SCI |
王霄 |
司慧 |
Study on mass flow characteristics of fluidized bed with a circulative accelerating tube |
JOURNAL OF INDUSTRIAL AND |
3.512 |
26 |
2015 |
SCI |
黄豆豆 |
徐学峰 |
The capillary outward flow inside pinned drying droplets |
INTERNATIONAL JOURNAL OF HEAT AND |
2.383 |
27 |
2015 |
SCI |
赵健 |
赵健 |
Two-dimensional heterogeneous lattice model simulation of tensile racture in Dahurian Larch |
MATERIALS RESEARCH INNOVATIONS |
0.83 |
28 |
2015 |
SCI |
陈忠加 |
俞国胜 |
mproving the Conventional Pelletization Process to SaveEnergy during Biomass Densification |
BIORESOURCES |
1.425 |
29 |
2015 |
SCI |
苏勋文 |
苏勋文 |
CVD Method for Carbon Nanotubes Preparation Based on |
JOURNAL OF WUHAN |
0.4 |
30 |
2016 |
SCI |
李艳洁 |
李艳洁 |
3D DEM simulations and experiments exploring low-velocity projectile impacts into agranular bed |
POWDER TECHNOLOGY |
2.759 |
31 |
2016 |
SCI |
徐道春 |
李文彬 |
A friction model having multiple factors for high-speed cutting of aluminum alloy 6061-T6 |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
1.568 |
32 |
2016 |
SCI |
王慧 |
刘晋浩 |
A new profile design method for conjugate pump and its performance analysis |
ADVANCED COMPOSITE MATERIALS |
1.029 |
33 |
2016 |
SCI |
Jian,Zhao |
赵东 |
A Non-Contact Varying Temperature Strain Measuring System Based on Digital Image Correlation |
EXPERIMENTAL TECHNIQUES |
0.716 |
34 |
2016 |
SCI |
徐向波 |
徐向波 |
Automatic balancing of AMB systems using plural notch filter and adaptive synchronous compensation |
JOURNAL OF SOUND AND VIBRATION |
2.107 |
35 |
2016 |
SCI |
Guan, Cheng |
张厚江 |
Determining shear modulus of thin wood composite materials using a cantilever beam vibration method |
CONSTRUCTION AND BUILDING MATERIALS |
2.421 |
36 |
2016 |
SCI |
张军国 |
张军国 |
Directional Probability Perceived Nodes Deployment Based on Particle SwarmOptimization |
INTERNATIONAL JOURNAL OF DISTRIBUTEDSENSOR NETWORKS |
0.906 |
37 |
2016 |
SCI |
Wang, Yilin |
徐学锋 |
Expressions for the evaporation of sessile liquid droplets incorporating the evaporative cooling effect |
JOURNAL OF COLLOID AND INTERFACE SCIENCE |
3.782 |
38 |
2016 |
SCI |
Liu, Nian |
阚江明 |
Improved deep belief networks and multi-feature fusion for leaf identification |
NEUROCOMPUTING |
2.392 |
39 |
2016 |
SCI |
管成 |
张厚江 |
Measurement of Dynamic Viscoelasticity of Full-Size Wood Composite Panels Using a Vibration Testing Method |
BIORESOURCES |
1.334 |
40 |
2016 |
SCI |
Wang, Xiao |
司慧 |
Novel Concept of Fluidized Bed Reactor Design for Highly Efficient Internal Heat Transfer |
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH |
2.567 |
41 |
2016 |
SCI |
Yan, Xiaofei |
赵燕东 |
Real-Time Identification of Smoldering and Flaming Combustion Phases in Forest Using a Wireless Sensor Network-Based Multi-Sensor System and Artificial Neural Network |
SENSORS |
2.033 |
42 |
2016 |
SCI |
Cui, Xintong |
阚江明 |
Region matching based on colour invariants in rgb orthogonal space |
IET COMPUTER VISION |
0.573 |
43 |
2016 |
SCI |
Zhang Zhe |
李文彬 |
Theoretical and experimental analysis of a solar thermoelectric power generation device based on gravity-assisted heat pipes and solar irradiation |
ENERGY CONVERSION AND MANAGEMENT |
4.801 |
44 |
2016 |
SCI |
Hao, Wenrui |
阚江明 |
Application of self-tuning fuzzy proportional-integral-derivative control in hydraulic crane control system |
ADVANCES IN MECHANICAL ENGINEERING |
0.572 |
45 |
2016 |
SCI |
赵健 |
赵健 |
Deformation measurement using digital image correlation by adaptively adjusting the parameters |
OPTICAL ENGINEERING |
0.965 |
46 |
2016 |
SCI |
颜小飞 |
赵燕东 |
Real-Time Identification of Smoldering and Flaming Combustion Phases in Forest Using a Wireless Sensor Network-Based Multi-Sensor System and Artificial Neural Network |
SENSORS |
2.033 |
47 |
2017 |
SCI |
许莎莎 |
康峰 |
Evaluation of grapevine sucker segmentation algorithms forprecision targeted spray |
INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING |
1.007 |
48 |
2017 |
SCI |
Ke, Qingchan |
徐道春 |
Cutting zone area and chip morphology in high-speed cutting of titanium alloy Ti-6Al-4V |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
0.761 |
49 |
2017 |
SCI |
Lei, Ning |
徐道春 |
Deformation temperature and material constitutive model of cupronickel B10 |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
0.761 |
50 |
2017 |
SCI |
Wu, Hongfang |
闫磊 |
Study on the control algorithm for lower limb exoskeleton based on ADAMS/Simulink co-simulation |
JOURNAL OF VIBROENGINEERING |
0.384 |
51 |
2017 |
SCI |
Guan, Cheng |
张厚江 |
Experimental and Theoretical Modal Analysis of Full-Sized Wood Composite Panels Supported on Four Nodes |
MATERIALS |
2.728 |
52 |
2017 |
SCI |
Zhang, Junguo |
张军国 |
Adaptive compressed sensing for wireless image sensor networks |
MULTIMEDIA TOOLS AND APPLICATIONS |
1.53 |
53 |
2017 |
SCI |
Wang, Xiao |
司慧 |
Conveying Characteristics of Dual Pneumatic Feeder Used for Biomass Pyrolysis |
BIORESOURCES |
1.321 |
54 |
2017 |
SCI |
赵健 |
赵健 |
Deformation measurement using digital image correlation by adaptively adjusting the parameters |
OPTICAL ENGINEERING |
0.965 |
55 |
2017 |
SCI |
王青春 |
王青春 |
A Real-Time Vibration Suppression Strategy in Electric Vehicles |
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY |
4.066 |
56 |
2017 |
SCI |
Chen, |
李文彬 |
Aerodynamic noise analysis of a portable |
NOISE CONTROL ENGINEERING JOURNAL |
0.606 |
57 |
2017 |
SCI |
Guan,Cheng |
张厚江 |
Experimental and Theoretical Modal Analysis of Full-Sized Wood Composite Panels Supported on Four Nodes |
MATERIALS |
2.654 |
58 |
2017 |
SCI |
唐亮 |
唐亮 |
Homogenized modeling methodology for 18650 lithium-ion battery module under large deformation |
PLOS ONE |
2.806 |
59 |
2017 |
SCI |
Xu,Xiangbo |
陈劭 |
Elimination of Harmonic Force and Torque in Active Magnetic Bearing Systems with Repetitive Control and Notch Filters |
SENSORS |
2.677 |
60 |
2017 |
SCI |
Men,Sen |
闫磊 |
A Classification Method for Seed Viability Assessment with Infrared Thermography |
SENSORS |
2.677 |
61 |
2017 |
SCI |
赵健 |
赵健 |
Neighborhood binary speckle pattern for deformation measurements insensitive to local illumination variation by digital image correlation |
APPLIED OPTICS |
1.65 |
62 |
2017 |
SCI |
Hao,Zhibin |
李文彬 |
Internal resistance of a tree-based power source |
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY |
1.135 |
63 |
2017 |
SCI |
Ke,Qingchan |
徐道春 |
Cutting zone area and chip morphology in highspeed cutting of titanium alloy Ti-6Al-4V |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
1.128 |
64 |
2017 |
SCI |
Wang,Yaxiong |
康峰 |
Identification and location of grapevine sucker based on information fusion of 2D laser scanner and machine vision |
INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING |
0.835 |
65 |
2017 |
SCI |
Zhao,Jian |
赵健 |
Entropy-to-intensity gradient ratio: An indirect empirical parameter for error assessment of FFTbased digital volume correlation |
OPTIK |
0.835 |
66 |
2017 |
SCI |
Yan,Lei |
闫磊 |
The biospeckle method for early damage detection of fruits |
MODERN PHYSICS LETTERS B |
0.617 |
67 |
2017 |
SCI |
Chen,Xiaoxuan |
李文彬 |
Aerodynamic noise analysis of a portable pneumatic extinguisher |
NOISE CONTROL ENGINEERING JOURNAL |
0.606 |
68 |
2017 |
SCI |
Fan, Lei |
闫磊 |
Dynamics analysis and simulation verification of a novel knee joint exoskeleton |
JOURNAL OF VIBROENGINEERING |
0.398 |
69 |
2017 |
SCI |
Wu,Hongfang |
闫磊 |
Study on the control algorithm for lower limb exoskeleton based on ADAMS/Simulink co-simulation |
JOURNAL OF VIBROENGINEERING |
0.398 |
70 |
2017 |
SCI |
樊月珍 |
樊月珍 |
Study on the interaction of electric vehicle roll and battery pack stability |
MECHANIKA |
0.382 |
71 |
2018 |
SCI |
Yan,Xiaofei |
赵燕东 |
Determining Forest Duff Water Content Using a Low-Cost Standing Wave Ratio Sensor |
SENSORS |
2.677 |
72 |
2018 |
SCI |
Liang,Hao |
赵燕东 |
Non-Destructive Methodology to Determine Modulus of Elasticity in Static Bending of Quercus mongolica Using Near-Infrared Spectroscopy |
SENSORS |
2.677 |
73 |
2018 |
SCI |
Wen,Yuxin |
赵东 |
Theoretical and experimental considerations on the neutral axis of wood beams with a hole in different locations |
HOLZFORSCHUNG |
1.868 |
74 |
2018 |
SCI |
Feng,Wenzhao |
张军国 |
A Novel Saliency Detection Method for Wild Animal Monitoring Images with WMSN |
JOURNAL OF SENSORS |
1.704 |
75 |
2018 |
SCI |
Wang,Yaxiong |
康峰 |
A Robust Control Method for Lateral Stability Control of In-Wheel Motored Electric Vehicle Based on Sideslip Angle Observer |
SHOCK AND VIBRATION |
1.281 |
76 |
2018 |
SCI |
Zheng,Jiajia |
唐亮 |
A Numerical Investigation of Risk Factors Affecting Lumbar Spine Injuries Using a Detailed Lumbar Model |
APPLIED BIONICS AND BIOMECHANICS |
0.943 |
77 |
2018 |
SCI |
Zhao,Xiaomao |
赵东 |
Study of the quality of wood texture patterns in digital image correlation |
OPTIK |
0.835 |
78 |
2018 |
SCI |
Zhu,Yue |
阚江明 |
A novel forestry chassis with an articulated body with 3 degrees of freedom and installed luffing wheel-legs |
ADVANCES IN MECHANICAL ENGINEERING |
0.827 |
79 |
2018 |
SCI |
Li,Chunxiao |
阚江明 |
Illumination estimation based on image characteristic |
JOURNAL OF ELECTRONIC IMAGING |
0.754 |
80 |
2018 |
SCI |
Wang,Xuehao |
陈忠加 |
EFFECTS OF POPLAR FIBRES AS SOLID BRIDGE ON THE PHYSICAL CHARACTERISTICS OF BIOMASS BRIQUETTE MADE FROM SAWDUST AND BAMBOO POWDER |
WOOD RESEARCH |
0.629 |
81 |
2018 |
SCI |
Wang,Yanming |
陈忠加 |
INFLUENCE OF DIE TEMPERATURE AND MOISTURE CONTENT ON THE DENSIFICATION OF BAMBOO POWDER USING DIE HEATING METHOD |
WOOD RESEARCH |
0.629 |
82 |
2018 |
SCI |
Yao, |
阚江明 |
Vibration analysis and optimization of a vertical disc stump grinder |
ADVANCES IN |
0.827 |
83 |
2018 |
SCI |
Hu, |
阚江明 |
Classification of surface electromyogram signals based on directed acyclic graphs and support vector machines |
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES |
0.578 |
84 |
2018 |
SCI |
Kang, |
李文彬 |
Establishment of a static nozzle atomization model for forest barrier treatment |
CROP PROTECTION |
1.834 |
85 |
2018 |
SCI |
Xu, |
刘晋浩 |
Synchronous Force Elimination in the Magnetically Suspended Rotor System With an Adaptation to Parameter Variations in the Amplifier Model |
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS |
7.168 |
86 |
2018 |
SCI |
刘素梅 |
刘素梅 |
Theoretical Analysis on the Short- Circuit Current of Inverter- Interfaced Renewable Energy Generators with Fault-Ride-Through Capability |
SUSTAINABILITY |
1.789 |
87 |
2018 |
SCI |
Li, |
文剑 |
Application of Ground-Penetrating Radar for Detecting Internal Anomalies in Tree Trunks with Irregular Contours |
SENSORS |
2.677 |
88 |
2018 |
SCI |
Zhang, |
谢将剑 |
Research on power-frequency electromagnetic interference model of multicore twisted signal cable of high-speed railway |
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES |
0.578 |
89 |
2018 |
SCI |
Hao, |
徐道春 |
Quantitative analysis of frictional behavior of cupronickel B10 at the tool-chip interface during dry cutting |
TRIBOLOGY INTERNATIONAL |
2.903 |
90 |
2018 |
SCI |
Zhang, |
张超一 |
Modular Algebraic Precoding Relay System Model Based on Lattice Reduction |
IEEE ACCESS |
3.244 |
91 |
2018 |
SCI |
Wang, |
赵健 |
Deformation Monitoring System Based on 2D-DIC for Cultural Relics Protection in Museum Environment with Low and Varying Illumination |
MATHEMATICAL PROBLEMS IN ENGINEERING |
0.802 |
92 |
2018 |
SCI |
Xiao, |
文剑 |
Detecting and Measuring Internal Anomalies in Tree Trunks Using Radar Data for Layer Identification |
Journal of Sensors |
1.704 |
93 |
2018 |
SCI |
He, Fang |
何芳 |
Statistical Analysis of Circulating Water Quality Parameters under Variable-Frequency Vertical Electromagnetic Fields |
PROCESSES |
1.279 |
94 |
2018 |
SCI |
Zhu, Yue |
阚江明 |
Strategies of traversing obstacles and the simulation for a forestry chassis |
INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS |
0.987 |
95 |
2018 |
SCI |
Zheng, |
郑一力 |
Research on Virtual Driving System of a Forestry Logging Harvester |
WIRELESS PERSONAL COMMUNICATIONS |
0.951 |
96 |
2018 |
SCI |
Zheng, |
郑一力 |
Mechanical design and analysis of a gripper for non-cooperative target capture in space |
Advances in Mechanical Engineering |
0.827 |
97 |
2018 |
SCI |
Zhang, C. |
张超一 |
Research on the Influence of Water Vapor Diffusion and Evaporation on Water and Heat Transfer in Frozen Soil |
EURASIAN SOIL SCIENCE |
0.576 |
98 |
2019 |
SCI |
Xu, Xiangbo |
刘晋浩 |
Internal model control for reduction of bias and harmonic currents in hybrid magnetic bearing |
MECHANICAL SYSTEMS AND |
4.116 |